I, on the red plastic
　　SMT red plastic single-component room temperature after the heat storage quickly cured epoxy adhesive, which allows low temperature curing, a small amount of ultra high-speed micro-coating can remain without a stable shape drawing, excess glue, collapse, the "shear thinning "of viscosity characteristics and low moisture absorption, very suitable for room temperature SMT stencil printing process, dot profile is very easy to control, storage stable and has excellent thermal shock resistance and electrical performance, safety, full compliance with environmental requirements.
Second, the nature of red plastic
　　Red gum has a viscosity flow, temperature characteristics, wetting characteristics. According to the characteristics of red plastic, it is in production, the use of red plastic object is to make the parts firmly adhered to the surface of the PCB, to prevent it from falling.
　　Third, the red plastic applications:
　　Or use the dispenser on the press:
　　1, in order to maintain the quality of plastic patch, please placed in the refrigerator (5 ± 3 ℃) storage;
　　2. Remove from the refrigerator before use, next time should be at room temperature;
　　3, ethyl acetate or toluene may be used to clean the hose.
Dispensing:
　　1, at the point the hose Jiaruhousai can obtain more stable dispensing volume;
　　2, the recommended dispensing temperature is 30-35 ℃;
　　3, sub-decorated hose, use a special glue points installed equipment, in order to prevent the mixing of air bubbles in the glue.
　　Squeegee: squeegee recommended temperature of 30-35 ℃.
　　Note: After the red plastic removed from a refrigerated environment, and reach room temperature before use can not be opened. To prevent contamination of the original product may not be used for any patch of plastic back into its original container.